What is NIKKO SMARTTOP foundation powder?

NIKKO SMARTTOP is a pre-mixed compound in powder form, used to sprinkle directly onto the concrete surface while it is still wet, combined with troweling to help harden the floor surface, increase abrasion resistance and aesthetics. The product comes in two colors: Gray and Green; other colors can be produced to order.

     

Purpose of using Nikko Smarttop to trowel concrete floors

All projects can use trowel powder for concrete floors for the following purposes:
  1. Beautify the floor: Nikko Smarttop has colors (blue, gray) that are sometimes used for simple purposes of decoration and color.
  2. Floor polishing: Polishing concrete floors, in addition to decorative purposes, also helps make the floor smoother and better prevents dust formation! Cleaning becomes easier too.
  3. Increase strength: Nikko Smarttop hardening rub helps concrete floors withstand heavy equipment, vibration, etc. without chipping. This helps the device operate more stably and accurately. Especially indispensable for electronics and printing factories. Or if it is a transport road or warehouse, the road surface is also firmer to avoid damage.
  4. Abrasion resistance: Helps the floor withstand vibrations without wearing out the floor level over time, preventing floor dust from creating. This reason is the same as reasons 2 and 3.
  5. Waterproofing: The density of Nikko Smarttop trowel helps prevent water from seeping up from below.
For the above purposes, many fields need to use Nikko Smarttop trowel powder for operating floors.

Some projects cannot, or shouldn’t, lack ground powder

Nikko Smarttop trowel powder is used in the following fields:
– Industrial factory floor, where production equipment is located
– Warehouse floors, places subject to heavy loads and passing vehicles
– Parking
– School
– Commercial centers, places that need to be clean and easy to clean
– Floors and basements, which need to be clean and prevent water from seeping onto the floor
– Complex, industrial areas…
– Concrete road

Nikko Smarttop trowel powder – Points to note when constructing in HCM

Note:
– Surface polishing only applies to natural gray products. Does not apply to colored products.
– In hot, dry and windy weather conditions, you should finish quickly and then maintain immediately to avoid rapid drying.
Maintenance
– Maintain the surface immediately after finishing with liquid maintenance compounds. Surfaces using colored products should not be maintained with water, wet sacks, wet sand, nylon or moisture-proof paper. Surface protection: The surface should be covered and protected after applying the maintenance layer to avoid staining, discoloration, or mechanical impact.
Toilet
– Clean tools and equipment with water before the material hardens.
– Note: The product is not toxic but is alkaline like cement which can cause skin ulcers or allergies upon contact. Therefore, when constructing, you must follow health safety principles such as wearing gloves and masks. After work, you must clean your body thoroughly.
Nikko Smarttop trowel powder – Points to note when constructing in HCM
Customers who wish to provide or use our products. Please contact the information below to receive a quote as soon as possible.

ADVANTAGES AND APPLICATIONS OF NIKKO SMARTTOP

ADVANTAGE
  • High abrasion resistance.
  • Increases collision resistance
  • High consistency, minimizing oil and lubricant penetration.
  • Reduce dust on concrete surfaces
  • Economic efficiency, increased project lifespan.
APPLICATION
NIKKO SMARTTOP is used for heavy duty industrial floors. Traffic works and other structures subject to high abrasion. Areas that require aesthetics and dust resistance include:
  • Civil and industrial construction projects.
  • Factory floor, warehouse floor.
  • Basement, hallway, hall.
  • Parking lot, commercial area, shopping.
  • Production areas, hospitals

Leave a Reply

Your email address will not be published. Required fields are marked *

All in one